Product ID:SCOTCH WELD 2216 B/A PART A TRANSLUCENT EPOXY ADHESIVE.
MSDS Date:08/22/1996
FSC:8040
NIIN:00-145-0432
Status Code:A
MSDS Number: CKKPQ

Emergency Phone: 0000000000

Info Phone: 1-612-733-1110

Cage: 04963

Telephone: 800-364-3577/651-737-6501(24 HOURS)

Cage: 04963

AMINE TERMINATED POLYETHER/CARBOXYLIC ACID REACTION PRODUCT

RTECS: AT1005687

Health Hazards Acute and Chronic:EYE CONTACT RESULTS IN CHEMICAL
RELATED BURNS (CHEMICAL CORROSIVITY). VAPORS FROM HEATED MATERAIL
MAY CAUSE EYE IRRITATION. DUST CREATED BY CUTTING, GRINDING,
SANDING, OR MACHINING MAY CAUSE EYE IRRIT ATION. ALLERGIC AND MILD
SKIN REACTIONS. INHALATION CAN CAUSE IRRITAION. VAPORS FROM HEATED
MATERIAL MAY CAUSE RESPIRATORY SYSTEM IRRITATION. DUST FROM
GRINDING, SANDING, OR MACHINING MAY CAUSE IRITA TION OF THE
RESPIRATORY SYSTEM. INGESTION MAY CAUSE IRRITATION OF
GASTROINTESTINAL TISSUES.
Effects of Overexposure:EYE CONTACT: CAN INCLUDE CLOUDY APPEARANCE OF
THE CORNEA, CHEMICAL BURNS, PAIN, TEARING, ULCERS, IMPAIRED VISION
OR LOSS OF VISION. SKIN CONTACT: CAN INCLUDE REDNESS, SWELLING,
ITCHING AND BLISTERIN G. INHALATION: CAN INCLUDE SORENESS OF THE
NOSE AND THROAT, COUGHING AND SNEEZING. INGESTION: CAN INCLUDE
PAIN, VOMITING, ABDOMINAL TENDERNESS, NAUSEA, BLOOD IN VOMITUS, AND
BLOOD IN FECES.

First Aid:EYE:IMMEDIATELY FLUSH EYES W/LARGE AMOUNTS OF WATER.GET
IMMEDIATE MEDICAL ATTENTION.SKIN:IMMEDIATELY WASH W/SOAP&LARGE
AMOUNTS OF WATER.REMOVE CONTAMINATED CLOTHING BEFORE REUSE&DISPOSE
OF CONTAMINATE SHOES.INHALATION:IF SIGNS/SYMPTOMS OCCUR,REMOVE
PERSON-FRESH AI.IF SIGNS/SYMTPOMS CONTINUE,CALL
PHYSICIAN.INGESTION:DON'T INDUCE VOMITING.DRINK2GLASSES WATER.CALL
PHYSICIAN.*

Flash Point:>93.3C, 200.F
200F
Extinguishing Media:CO2, WATER, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:WEAR FULL PROTECTIVE CLOTHING, INCLUDING
HELMET, SELF-CONTAINED POSITIVE PRESSURE OR PRESSURE DEMAND
BREATHING APPARATUS, BUNDER COAT AND PANTS, BANDS AROUND ARMS,
WAIST AND LEGS, FACE MASK, AND PROTE CTIVE COVERING FOR EXPOSED
AREAS OF THE HEAD.
Unusual Fire/Explosion Hazard:NONE

Spill Release Procedures:REFER TO OTHE SECTIONS OF THIS MSDS FOR
INFORMATION REGARDING PHYSICAL AND HEALTH HAZARDSS, RESPIRATORY
PROTECTION, VENTILATION, AND PERSONAL PROTECTIVE EQUIPMENT. COVER
WITH ABSORBENT MATERIAL. COLLE CT SPILLED MATERIAL. PLACE IN A US.
DOT-APPROVED CONTAINER. IN USA CALL 1-612-733-1110 OR
1-612-733-6100 FOR 24 HOUR SPILL ASSISTANCE.

Handling and Storage Precautions:STORE AWAY FROM HEAT. KEEP OUT OF THE
REACH OF CHILDREN. KEEP CONTAINER TIGHTLY CLOSED.

Respiratory Protection:AVOID BREATHING OF VAPORS CREATED DURING THE
CURE CYCLE. AVOID BREATHING OF DUST CREATED BY CUTTING, SANDING OR
GRINDING. SELECT ONE OF THE FOLLOWING NIOSH APPROVED RESPIRATORS
BASED ON AIRBORNE CONCE NTTRATIONS OF CONTAMINANTS AND IN
ACCORDANCE WITH OSHA REGULATIONS : HALF MASK RESPIRATOR.
Ventilation:PROVIDE APPROPRIATE LOCAL EXHAUST FOR GRINDING, CUTTING OR
SANDING CURED MATERIAL.
Protective Gloves:POLYETHYLENE/ETHYLENE VINYL ALCOHOL.
Eye Protection:WEAR VENTED GOGGLES. WEAR SAFETY GLASSES WITH SIDE
SHIELDS.
Work Hygienic Practices:DO NOT EAT, DRINK, OR SMOKE WHEN USING THIS
PRODUCT. WASH EXPOSED AEAS THOROUGHLY WITH SOAP AND WATER. DO NOT
INGEST.
Supplemental Safety and Health
CURING SOVENS MUST BE EXHAUSTED TO OUTDOORS OR TO A SUTABLE EMISSION
CONTROL DEVICE. USE IN A WELL VENTILATED AREA. IF EZXHAUST
VENTILATION IS NOT ADEQUATE, USE APPROPRIATE RESPIRATORY
PROTECTION.

Spec Gravity:0.970 (WATER =1)
Viscosity:CA. 7000.0 CENTIPOISE
Appearance and Odor:AMBER PASTE/ PUNGENT ODOR

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:HEAT IS GENERATED DURING CURE. DO NOT
CURE A MASS LARGER THAN 50 GRAMS IN A CONFINED SPACE TO PREVENT A
PREMATURE REACTION (EXOTHERM) WITH PRODUCTION OF INTENSE HEAT AND
SMOKE.
Hazardous Decomposition Products:CO, CO2, OXIDES OF NITROGEN, AMINE
COMPOUNDS, TOXIC VAPORS, GASES OR PARTICULATES.

Waste Disposal Methods:CURE PRODUCT ACCORDING TO PRODUCT INSTRUCTIONS.
INCINERATE UNCURED WASTE IN AN INDUSTRIAL OR COMMERCIAL
INCINERATOR. DISPOSE OF COMPLETELY CURED (OR POLYMERIZED) MATERIAL
IN A SANITARY LANDFILL.

Toxicological Information:*OTHER: EXPOSURE TO THIS MATERIAL IN NORMAL
STORAGE AND HANDLING HAS NOT BEEN REPORTECD TO CAUSE SIGNIFICANT
ADVERSE HEALTH EFFECTS. HOWEVER, UNDER NORMAL PROCESSING
CONDITIONS, E.G. GRINDING OR HEAT ING, THIS PRODUCT MAY RELEASE
FUMES ANDVAPORS OF VARIABLE COMPOSITION BASED ON SPECIFFIC PROCESS
CONDITIONS. THESE PROCESS RELEASES MAY PRODUCE IRRITATION OR ANY OF
THE HEALTH EFFECTS LISTED ABOVE WHE N THE EMISSIONS ARE PRESENT AT
ELEVATED CONCENTRATIONS. USE WITH APPROPRIATE LOCAL EXHAUST
VENTILATION.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.